Blauberg Benelux

VENTO EXPERT A30 S10 W V.2

Single-room heat recovery unit with Wi-Fi control. Air flow up to 30 m³/h. Heat recovery efficiency up to 81 %.

SERIES OF PRODUCTS

Vento Expert A30 S10 W V.2

FEATURES
Arrangement of efficient energy-saving supply and exhaust single-room ventilation in flats, houses, cottages, social and commercial premises.Reducing heat losses caused by ventilation due to heat recovery.Humidity balance and regulated air exchange create individually controlled microclimate.Wi-Fi communication between several single room ventilation units for coordinated operation.Controlled by Android or iOS smartphone or tablet.
DESIGN
One of the best regeneration efficiency on the market due to innovative hexagonal structure of the heat exchanger cells
 Built-in Wi-Fi for wireless communication between units and Android or iOS device control
HEAT AND HUMIDITY REGENERATION
UNIT OPERATING LOGIC IN WINTER PERIOD
Warm stale air is extracted from the premise, flows through the ceramic regenerator and transfers its heat energy and moisture to it.As the ceramic regenerator gets warmed up, the unit switches to the supply mode. Clean cold intake air flows through the regenerator and absorbs accumulated heat and humidity.When the ceramic regenerator is cooled down, the unit switches to the extract air mode.
CONTROL
Control of the unit operation mode is performed by means of smartphone or tablet. Wi-Fi communication between several units for coordinated operation is available.
 

Blauberg Vento V.2 app for Android or iOS devices is available at Google Play and App Store.
MOUNTING
The unit is designed for through-the-wall installation inside a prepared hole in an outer wall of the building.The best ventilation solution is pairwise installation of reverse phase synchronized units. Some units ensure supply of fresh air to the room and the other units extract air from the premise. This way the most efficient balanced ventilation is arranged. In case of brand new construction, units are mounted in two stages:

  • Pre-installation of an air duct and an outer ventilation hood at the stage of indoor finishing and outer decorative wall finishing.
  • Completion of the installation before commissioning of a house. It includes installation of the indoor unit with controller and air damper, the cartridge, the regenerator, the fan and the filters.

Vento Expert A30 S10 W V.2 – data sheet (pdf 643.36Kb) – SHOW – DOWNLOAD

Vento Expert A30 W V.2 – user’s manual (pdf 5.41Mb) – SHOW – DOWNLOAD

SE Vento Expert W – user’s manual (pdf 1.74Mb) – SHOW – DOWNLOAD

SEE ALSO

Related products